Instructions and FAQs

What Comes with Your Lamp:

 

Your Geode Oil Lamp

Sample of Non-toxic lamp oil (recommended-Firefly Kosher Clean Fuel Lamp Oil- available on Amazon)

Smokeless/Virtually Odorless)

A funnel

​

How to Use Your Geode Oil Lamp:

1.) Using a funnel, carefully pour lamp oil into the reservoir

2.) Trim wick to desired length and insert wick with/ glass holder into geode hole. Wick should touch the bottom of the oil cavity. If you have difficulty pushing the wick through the hole, use the wooden pick to help ease it through.

3.) Let the wick absorb the oil for 10 minutes before lighting. Push top of wick downto be level w/ glass holder for a clean, controlled flame. A longer wick can cause excessive smoke.

4.) Use a long match or lighter to ignite the wick carefully.

5.) Gently blow out the flame or use a candle snuffer.

 

Care & Maintenance

 

Refill the lamp only when it’s cool and never while it’s lit.

Trim the wick if it becomes too blackened or sooty. Replace just wick if necessary (1/8" round cotton wick).

Store in a cool, dry place, away from direct sunlight and moisture. Certain stones may be water soluble.

Do not handle roughly or tip over. Lamp is sturdy, but still needs to be handled delicately.